09/04/2020 10:48:40

Sensor - Ambient Air Temperature (Remove and Replace)

Correction code 18107212 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the underhood storage unit. See Underhood Storage Unit (Remove and Replace).
  2. Use a small flat bladed tool to carefully release the ambient temperature sensor cover from the active grille shutter.
  3. Disconnect the ambient temperature sensor electrical connector.
  4. Release the clip that attaches the ambient temperature sensor to the active grille shutter.
  5. Remove the ambient temperature sensor from the vehicle.

Install

  1. Install the clip that attaches the ambient temperature sensor to the active grille shutter.
  2. Connect the ambient temperature sensor electrical connector.
  3. Install the ambient temperature sensor cover to the active grille shutter.
  4. Install the underhood storage unit. See Underhood Storage Unit (Remove and Replace).