11/04/2024 02:19:53

Vehicle Sanitation - Tunap (Basic Package) (EMEA)

Correction code 18106718 0.40 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 1787461-00-A KIT, TUNAP, VEHICLE SANITATION, BASIC
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
When not in use, store the cleaning products in a cabinet designed for flammable materials.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Take care to protect all electrical components (connectors, harnesses, body controllers, etc.) from overspray.
Informational PurposesAn informational icon, calling your attention
Note
Dispose of spent cleaners and containers in accordance with all local, regional, national and international regulations.

HVAC Housing Sanitation using Tunap 996

  1. Remove the cabin filters. See Filter - Cabin (Remove and Replace).
  2. Power off the vehicle, and let the evaporator dry for 3 minutes.
  3. Apply Tunap 996 hygienic fluid on a clean microfiber cloth, and then clean the inside of the air filter cover.
  4. Install the supplied fog probe onto the hygienic cleaner can, and then spray the inside of the filter housing with hygienic cleaner.
    Informational PurposesAn informational icon, calling your attention
    Note
    Spray the contents of the entire can of hygienic cleaner.
  5. Let the hygienic cleaner dry for 10 minutes, and then install new cabin filters. See Filter - Cabin (Remove and Replace).

Interior Air Sanitation using Tunap 589

  1. Switch the HVAC system to recirculated air mode.
  2. Select the highest fan speed.
  3. Position the Tunap 589 bottle on the center console.
  4. Press the sprayhead until it clicks.
  5. Leave the Tunap 589 bottle in the vehicle for 10 minutes while all doors and windows are closed.
  6. Open all doors to vent the interior.
  7. Remove the Tunap 589 bottle from the vehicle.
  8. Close all doors.

Interior Sanitation using Tunap I5880

  1. Apply Tunap I5880 onto a clean microfiber cloth.
  2. Gently wipe off all contact surfaces of the vehicle interior, like:
    • Steering wheel
    • Stalks
    • Door handles and switches
    • Touchscreen
    • Seat belt tongue and buckle
    • Glove box lid
    • Center console lid(s)
    • Etc.