Release Notes April-June 2024
Archived Release Notes:
- June-September 2022: Release Notes June-September 2022
- October-December 2022: Release Notes October-December 2022
- January-March 2023: Release Notes January-March 2023
- April-June 2023: Release Notes April-June 2023
- July-September 2023: Release Notes July-September 2023
- October-December 2023: Release Notes October-December 2023
- January-March 2024: Release Notes January-March 2024
- April-June 2024: Release Notes April-June 2024
- July-September 2024: Release Notes July-September 2024
Week Ending June 29, 2024
The following procedure(s) were updated:
- BMS PCBA - High Voltage Battery Assembly (HV Battery 2.0) (Remove & Replace) - Added alternative sealants to replace Threebond 1216E due to non availability of Threebond in certain markets
- Electromechanical Brake Booster Assembly (LHD) (Remove and Replace) - Updated installation procedure and revised references.
- HV/LV Ancillary Unit (HV Battery 2.0) (Remove and Replace) - Added alternative sealants to replace ThreeBond 1216E due to non-availability of ThreeBond in certain markets.
- Rapid Mate - Low Voltage - HV Battery 2.0 (Remove and Replace) - Added alternative sealants to replace Threebond 1216E due to non availability of Threebond in certain markets.
- Vehicle HV Disablement Procedure - Added part numbers for silicone lubricant.
Week Ending June 22, 2024
The following procedure(s) were updated:
- Clear Forward Camera View (Precision Cleaning Of Inboard Windshield) - Updated the inspection method and diagrams and added the tool list.
- Seal - Axle - Front Drive Unit - LH (1st Generation) (Remove and Replace) - Updated correction code to 39301202.
Week Ending June 15, 2024
The following procedure(s) were updated:
- Fuse - Pyrotechnic - HV Battery 2.0 (Remove and Replace) - Updated parts list, deleting the fuse cover bolts and fuse mounting bolts to be ordered.
Week Ending June 8, 2024
The following new procedure(s) were added:
The following procedure(s) were updated:
- Firmware Update - Mobile Connector - Added steps to update Mobile Connector firmware on vehicles operating software version 2024.14+.
- Fuse - Pyrotechnic - HV Battery 2.0 (Remove and Replace) - Updated parts lists.
- Vehicle HV Disablement Procedure - Added warning to measure the specified order of locations for high voltage.
Week Ending June 1, 2024
The following procedure(s) were updated:
- Fuse - Pyrotechnic - HV Battery 1.0/1.5 (Remove and Replace) - Added parts lists.
- Fuse - Pyrotechnic - HV Battery 2.0 (Remove and Replace) - Added parts lists.
- HV/LV Ancillary Unit (HV Battery 2.0) (Remove and Replace) - Added parts lists.
Week Ending May 25, 2024
The following procedure(s) were updated:
- Motor - Seat Track - 1st Row - LH (Remove and Replace) - Added application scope.
Week Ending May 18, 2024
The following procedure(s) were updated:
- Clear Forward Camera View (Precision Cleaning Of Inboard Windshield) - Updated the procedure title.
Week Ending April 27, 2024
The following new procedure(s) were added:
The following procedure(s) were updated:
- Actuator - Pedestrian Protection - LH (Remove and Replace)Changed correction code from 20203102 to 20300102 and updated Toolbox routines to be run. -
- Module - Restraint Control - RCM (Remove and Replace) - Updated Toolbox routines to be run after replacing the RCM.
Week Ending April 20, 2024
The following procedure(s) were updated:
- Control Arm Assembly - Rear - Lower - LH (Remove and Replace) - Procedure updated to latest PDS validation.
- Power Conversion System Coolant (Drain) (On Table) - Added list of required equipment.
Week Ending April 13, 2024
The following procedure(s) were updated:
- Halfshaft - Front Drive Unit - LH (2nd Generation) (Remove and Replace) - Changed the steps of using a S-hook to steps of removing the bolt that attaches the brake jounce hose bracket to the LH air spring module.
- Clear Forward Camera View (Precision Cleaning Of Inboard Windshield) - Added detailed instructions on how to clean the windshield and added steps of camera inspection after cleaning.
- Windshield (Vehicles with 2nd Generation or Later Autopilot Hardware) (Remove and Replace) - Added a step of cleaning the windshield, especially the forward-facing camera area, to ensure a clear view of the forward-facing camera.
Week Ending April 6, 2024
The following new procedure(s) were added:
The following procedure(s) were updated:
- Fluids - Added new Gearbox Fluid section. - Updated washer fluid for North America.
- Four Wheel Alignment Check and Adjust - Added step to cycle TAS air suspension height.
- Headlights (Adjust), Europe (ECE) - Updated measurements and units.
- Headlights (Adjust), North America (SAE) - Updated measurements and units.
- Trim - Center Console - Rear (Remove and Replace) - Updated step to slide rear cupholder trim panel up and off.
- Receiver Dryer and Desiccant (Remove and Replace) - Added reminding of checking the pressure of A/C system before opening the accumulator.
- Wing - Upper - Active/Passive Spoiler (Remove & Replace) - Updated the method of removing/installing the spoiler upper wing and added the tool list.
- Wing - Upper - Active/Passive Spoiler (Remove & Install) - Updated the method of removing/installing the spoiler upper wing and added the tool list.